|
Product Detail :
|
Miscellaneous civil work in zone c at iit .
Earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge - all kinds of soil, filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m., supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete., surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. - all kinds of soil, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- all work up to plinth level, 124 (1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size)., 148 (1 cement 4 coarse sand (zone-iii) 8 graded stone aggregate 40 mm nominal size)., 1510 (1 cement 5 coarse sand (zone-iii) 10 graded stone aggregate 40 mm nominal size)., providing and laying damp-proof course 50mm thick with cement concrete 124 (1 cement 2 coarse sand(zone iii) 4 graded stone aggregate 20mm nominal size). , extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. , providing and applying a coat of residual petroleum bitumen of grade of vg-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. , providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement -11.53 (1 cement 1.5 coarse sand (zone-iii) 3 graded stone aggregate 20 mm nominal size)., reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 11.53 (1 cement 1.5 coarse sand (zone-iii) 3 graded stone aggregate 20 mm nominal size)., centering and shuttering including strutting, propping etc. and removal of form for , foundations, footings, bases of columns, etc. for mass concrete, suspended floors, roofs, landings, balconies and access platform, lintels, beams, plinth beams, girders, bressumers and cantilevers, columns, pillars, piers, abutments, posts and struts, steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. - thermo-mechanically treated bars of grade fe-500d or more, smooth finishing of the exposed surface of r.c.c. work with 6 mm thick cement mortar 13 (1 cement 3 fine sand)., extra for rendering smooth the top of suspended floors, landings and staircases (treads and risers) with cement mortar 12 (1 cement 2 coarse sand), including a floating coat of neat cement and protecting the surface with a layer of 7.5 cm of earth laid over 15 mm of fine sand in case of suspended floor and bricks laid in mud mortar in case of landings and steps, including subsequent removal and cleaning of the same., add for plaster drip course/ groove in plastered surface or moulding to r.c.c. projections., brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in, cement mortar 14 (1 cement 4 coarse sand), cement mortar 16 (1 cement 6 coarse sand), brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in , cement mortar 14 (1 cement 4 coarse sand), cement mortar 16 (1 cement 6 coarse sand), half brick masonry with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level. - cement mortar 14 (1 cement 4 coarse sand), brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 including grouting with cement mortar 14 (1 cement 4 fine sand)., providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 14 (1 cement 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edg
|