|
1
|
|
Sector
|
Railways Transport Services Tenders
|
Tender Value
|
N.A.
|
|
Location
|
Punjab Tenders
|
Ref.No
|
72011456
|
|
Closing Date
|
12 - Jul - 2024
|
57 Days to go
|
View Tender Details
|
|
Supply of double inlet centrifugal blower #*. single inlet radial blower 415v,3-phase,50 hz,185w,1045 cubic meter per hour discharge for exhausting air from pantry., as per drawing: edts331,rev-a,type-2,annex.a., packing instruction: alternator,rru, erru & accessories, transformer,bulk inverters, battery, charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polythene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thick & should have support of at least 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mm size. gap between each strip should not be more then 100mm. the material used for product packaging shall be eco-friendly.a list should be pasted on each wooden cage showing order no, pl no, description of the item, drg. no/ spec. no ,qty, firm's name & address and date of despatch etc., quality plan: n.a. [ warranty period: 30 months after the date of delivery ]double inlet centrifugal blower., as per drawing: edts331,rev-a,type-1., packinginstruction: alternator,rru, erru &accessories, transformer,bulk inverters , battery,charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polythene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thick &should have support ofat least 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mm size. gap between each strip should not be more then 100mm. the material used for product packaging shall be eco-friendly.a list should be pasted on each wooden cage showing order no, pl no, description of the item, drg. no/ spec. no ,qty, firm's name &address and date of despatch etc. note-1.theitem &its packing shall carry a qr code containing the details as listed below (qr code to be affixed near name plate of item &on top of packing) a)name of the manufacturer b)purchaseorder number c)purchaseorder date d)uniqueserial number (or lot number for bulk items) of the manufacturer
|
|
|
|
2
|
|
Sector
|
Textiles Product Tenders
|
Tender Value
|
N.A.
|
|
Location
|
Delhi Tenders
|
Ref.No
|
71661826
|
|
Closing Date
|
15 - Jun - 2024
|
30 Days to go
|
View Tender Details
|
|
Supply of Shawl, Accessories, Mens Wear, Womens Wear, Brass Items, Craft Items, Furnishing, Jewellery, Bead Spread, table Linen, Fabric Material, Pottery, Carpet, Sarees, Art Ojects, H Made furniture, Wooden Items, Herbal, Silver Items, Metal ware - artisan vendor enlistment Qty : 20000
|
|
|
|
|
|
4
|
|
Sector
|
Education And Research Institute Tenders
|
Tender Value
|
N.A.
|
|
Location
|
Jammu-kashmir Tenders
|
Ref.No
|
72012814
|
|
Closing Date
|
15 - Jun - 2024
|
30 Days to go
|
View Tender Details
|
|
Supply of Hardware and Sanitary Items - Paints of All Colours, Gi Pipe, Oil Bound Distemper, Exterior Plastic Emulsion White, Interior Plastic Emulsion White, Paint Brush 2", 3" 4', 6", Turpetine Oil, Putty for Glass, Touch Wood, Brass Bib Cock 1/2” Hy 440gm, Cp Bib Cock ½ ” Long Nose, Cp Pillar Cock ½ Hy, Cp Bib Cock ½ " Short Nose, Pvc Connection, Brass Ball Cock Set, Pvc Waste Pipe, Cp Waste Coupling, Pvc L/l Cistern, Pvc Ball, Stainlees Steel Sink, Chinaware Sink, Gm Gate/wheel Valve, English Seat White with Cover, White Wash Basin, Odessa Pan White, Urinal Pot White, Pvc Urinal Waste Pipe, Cp Concealed Stop Cock ½ " Hy, C P Angle Valve ½" Hy, Pvc P-trap, Pvc Water Tank Double Layered, Pvc Elbow, Cp Towel Rail, Wall Putty, Cp Nipple, Pvc Pipe, Pvc Flow Trap, Pvc Plain, Pvc Reducer, Pvc Pipe, Pvc Door Bend, Pvc Plain Bend, Pvc Bend, Pvc Plumbing Pipe, Jet Connection, English Seat Cover, Hydraulic Door Closer, Gi Socket, Gi Elbow, Gi Nipple, Cp Centre Hole Mixer, Wire Mesh, Brinze 0.75", Nails Assorted, Wooden Screws, Aluminium Tower Bolt, Steel Curtain Rod 1” Diameter, Steel Bracket for Curtain Rod, Aluminium Handle, Door Stopper, Door Spring, Steel Hinges, Exterior Plastic Emulsion Red, Paint Aluminium, Wood Primer, Red Oxide Metal Primer, White Cement, Lime Powder, Suttar Roll, Haskshaw Blade Double, Health Faucet, Ceramic Urinal Division Plate (standard), Cp Round Jali, Plywood, Mica Sheet, Mica Tape, Fevicol (sh, Heatx), Takora, Bit for Drill Machine, Sand Paper, Round Type Sand Paper, Hard Broom, Gi Tank Connection, Gi Socket Reducer, Gi Elbow Reducer, Silicon Tube Gun, M-seal 100 Gms for the Period From 01 Jun 2024 to 31 May 2025.
|
|
|
|
5
|
|
Sector
|
Railways Transport Services Tenders
|
Tender Value
|
N.A.
|
|
Location
|
Punjab Tenders
|
Ref.No
|
71704838
|
|
Closing Date
|
14 - Jun - 2024
|
29 Days to go
|
View Tender Details
|
|
Supply of Sound Insulating Wood Panels, Roof Flange, Guard – Room / Crew – Room Door, Crew – Room / Generator Room Door, Sound Damping / Insulation Paint, Pump Equipment with PLC Controller, 24v Starter Battery Charger for 500 KVA DA Set, Axle Mounted Disc Brake System, Five Types of Thin Walled Flex Elast Cable in 2.5 Sqmm, Thirteen Types of Thin Walled Flex Elast Cable in 4 & 6 Sqmm, Four Types of Thin Walled Flex Elast Cable in 95 & 150 Sqmm, Four Types of Thin Walled Flex Elast Cable in 95 & 120 Sqmm, 70 Ah 110v, VRLA Battery, Set of Side Wall Assly and Roof Complete for LHB Coaches, Emergency Brake Pull Box, Traction Center.
|
|
|
|
6
|
|
Sector
|
Railways Transport Services Tenders
|
Tender Value
|
N.A.
|
|
Location
|
Punjab Tenders
|
Ref.No
|
71623677
|
|
Closing Date
|
12 - Jun - 2024
|
27 Days to go
|
View Tender Details
|
|
Supply of 24v starter battery charger for 500kva da set #*. 24v starter battery charger for 500kva da set, as per drawing: edts106,am-1&2.cor-1., packing instruction: alternator,rru, erru & accessories, transformer,bulk inverters , battery, charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polythene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thick & should have support of at least 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mm size. gap between each strip should not be more then 100mm. the material used for product packaging shall be eco-friendly.a list should be pasted on each wooden cage showing order no, pl no, description of the item, drg. no/ spec. no ,qty, firm's name & address and date of despatch etc. [ warranty period: 30 months after the date of delivery ]
|
|
|
|
|
|
|
|
|
|
10
|
|
Sector
|
Railways Transport Services Tenders
|
Tender Value
|
N.A.
|
|
Location
|
Punjab Tenders
|
Ref.No
|
71781312
|
|
Closing Date
|
07 - Jun - 2024
|
22 Days to go
|
View Tender Details
|
|
Supply of battery charger 2.5kw under slung for lhb coaches #*. battery charger 2.5kw under slung for lhb hog/eog high capacity parcelvan (lvph) coach., as per drawing: edts415,rev-0, packing instruction: alternator,rru, erru & accessories, transformer,bulk inverters , battery, charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polythene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thick & should have support of at least 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mm size. gap between each strip should not be more then 100mm. the material used for product packaging shall be eco-friendly.a list should be pasted on each wooden cage showing order no, pl no, description of the item, drg. no/ spec. no ,qty, firm's name & address and date of despatch etc. [ warranty period: 30 months after the date of delivery ]
|
|
|